Home All Products
Professional Reticle Leveling System
Wheeler

Professional Reticle Leveling System

$114.99 Points To Earn: 919

out-of-stock

0.0 Leave a Review
STYLE 6035-0151
UPC 661120190509
In-Stock
6035-0151

total: $0

Order on Backorder Order on Backorder
tech specs:
Product UPC/EAN:
661120190509
Description:

WHEELER PROFESSIONAL RETICLE LEVELING SYSTEM

 

Technological advances in today’s modern firearms, ammunition and optics have enhanced the potential for long range accuracy. However, precision mounting and alignment of your system’s scope is critical to realizing the accuracy. A scope’s reticle must be precisely aligned with the weapon to ensure holdover or turret adjustments for bullet drop produce true vertical compensation for point of impact. If the crosshairs are canted left or right both elevation and windage bullet impact error will occur.

The Wheeler® Professional Reticle Leveling System is a precision tool and technique designed to allow a scope to be perfectly leveled on any firearm with ease. CNC machining, factory adjusted calibration set screws, anodized aluminum construction and protective molded case put this instrument in a class of its own.

The system is comprised of two machined aluminum level housings calibrated to their integrated levels. The Barrel Clamp Level is attached to the guns barrel while the smaller Reference Level is placed on scope base, bottom half of a ring or other flat surface perpendicular to the vertical axis of the gun. The gun is then rotated until the Reference Level is aligned. The tuning adjustment knob on the Barrel Clamp Level is then turned until its level is centered to match the Reference Level. At this point the Barrel Clamp Level is calibrated to the guns axis. The Scope can be installed loosely and the Reference Level placed on top of the scopes turret cap. The scope is rotated until the Reference Level is aligned with the Barrel Clamp Level and then simply secured in place. The Wheeler PRLS is the most effective instrument available for precision scope alignment.

 Precision tool for scope reticle alignment Factory calibrated Reference Level

 Maximize accuracy potential Tunable Barrel Clamp Level

 CNC machined aluminum level housings Protective storage case

Write Review
Overall Rating
0.0/5.0 Review Stats 0 total reviews

No reviews have been written for this product.

Wheeler Tools Warranty | Great North Precision

 

LIMITED LIFETIME WARRANTY

This Limited Lifetime Warranty is offered by Wheeler and applies to Wheeler™ brand products. Covered Products are warranted to be free from defects in materials and workmanship for the lifetime of the Covered Products. Wheeler will repair or replace with an item of equivalent value, at its option, any Covered Product or component part which is found to be defective under normal use and service, without charge, and within a reasonable amount of time after notification and delivery of the Covered Product (as set forth below), for the lifetime of the Covered Products. The life of the Covered Product means the life of the materials and components of the product. While Wheeler uses the very best materials and components for its products, all materials and components eventually wear out with use and exposure over time. A Covered Product’s life is therefore measured by how much use it gets and how well it is cared for -- not its overall age.

For more information please Visit: www.wheelertools.com

suggested products